Model Gama Frecventa Descriere Castig
SAS-570 170 MHz – 3 GHz Horn, Double Ridged Guide 10
SAS-571 700 MHz – 18 GHz Horn, Double Ridged Guide 12
SAS-572 18 GHz – 26.5 GHz Horn Antenna 20
SAS-573 26.5 GHz – 40 GHz Horn Antenna 20
SAS-574 18 GHz – 40 GHz Horn, Double Ridged Guide 17
SAS-575 1 GHz – 4 GHz Horn, Double Ridged Guide 12
——————————————————————————–
The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- .5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with ¼-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.
Gain: 15 dB, also available in 10 dB or 20 dB gain.
Model Frequency Range Description Gain
SAS-580 1.12 GHz – 1.70 GHz Horn, Standard Gain 14.7
SAS-581 1.70 GHz – 2.60 GHz Horn, Standard Gain 14.5
SAS-582 2.60 GHz – 3.95 GHz Horn, Standard Gain 15.1
SAS-583 3.95 GHz – 5.85 GHz Horn, Standard Gain 14.5
SAS-584 5.85 GHz – 8.20 GHz Horn, Standard Gain 14.8
SAS-585 8.2 GHz – 12.4 GHz Horn, Standard Gain 15.6
SAS-586 12.4 GHz – 18.0 GHz Horn, Standard Gain 14.9
SAS-587 18.0 GHz – 26.5 GHz Horn, Standard Gain 14.8
SAS-588 26.5 GHz – 40.0 GHz Horn, Standard Gain 14.6
——————————————————————————–
The Octive Horn Antennas are linear polarized, medium gain and low VSWR that cover the 1 to 8 GHz Frequency range. These antennas are designed to match the operating frequency of most octave bandwidth amplifiers that are typically used for compliance testing. Having an equal half power beamwidth in both polarization is ideal for compliance tesing, this allows the user to accurately illuminate the equipment under test in both horizontal and vertical polarizations. Each antenna is supplied with a tripod mount and waveguide to coax adapter. These adapters limit the maximum power handling capability. Without the adapter, these antennas are capable of handling continuous power well above 10,0000 Watts.
Model Frequency Range Description Gain
SAS-590-10 1 GHz – 2 GHz Octive Horn Antenna 15
SAS-590-11 2 GHz – 4 GHz Octive Horn Antenna 15
SAS-590-12 4 GHz – 8 GHz Octive Horn Antenna 14.9
Pentru detalii vizitati pagina producatorului: http://www.ahsystems.com/catalog/horns.php