IQC91000A can continuously record 90 minutes of 1000 MHz wide waveforms with 12-bit fidelity.

RF RECORD INTERFACE I and Q INPUTS: Each IQC91000A system includes:
(1) IQC91000A single channel signal recorder
(1) IQC90000A-101 analog differential baseband IQ outputs
(1) IQC90000A-DC5 down converter
(4) IQC90000A-MEM interface adapters to external disk storage units
(2) IQC90000A-S15 external RAID0 SSD external storage disks

SIGNAL RECORD: Recording Channels: 1
Center Frequency: 1 to 18 GHz
Record Bandwidth: 1000 MHz @ 4 dB max
Frequency Tuning Resolution: 1 kHz
Record Sample Rate: 3.2 GS/s | Resolution: 12 bits
Gain Adjustment Range: 10 to 30 dB | Resolution: 1.0 dB
Full-Scale Amplitude: +3 dBm, (input signal + gain)
1 dB Compression Point: -5 dBm typical, at + 15 dB gain
3rd Order Intercept Point: -5 dBm typical, at + 15 dB gain
Amplitude Flatness: ±2 dB

Average Noise Level
@ 1 GHz: -160 dBm/Hz, with 30 dB gain
@ 4 GHz: -162 dBm/Hz, with 30 dB gain
@ 10 GHz: -160 dBm/Hz, with 30 dB gain
@ 16 GHz: -160 dBm/Hz, with 30 dB gain

Spurious Free Dynamic Range: >50 dB, with 0 dB gain

Noise Figure, with 30 dB gain
13 dB, 500 MHz – 7.9 GHz
14 dB, 7.901 – 10.1 GHz
13 dB, 10.101 – 17.499 GHz
16 dB, 17.5 – 18.5 GHz

Input Connector: SMA Female, 50 Ohms
Input VSWR: <2.5:1
Recording Modes: Manual, Timed, Triggered, Time of Day, Gated Record

DATA STORAGE : Capacity: 30 TB, configured as two 15 TB RAIDs
Storage Time: 90 minutes @ 1000 MHz BW
Data Format: Binary packed 12 bit signed integers, RAIDO formatted as EXT4
Data Offload Speed: >500 MB/s, subject to source computer and storage device
Data Offload Format 16 bit signed integers
Data Upload Speed: >150 MB/s via PCIeGen2 x8, subject to source computer and storage device
Data Upload Format: 16 bit signed integers