Despre noi
Luni - Vin, 2022
8:00 – 18:30
Str. Dr. Louis Pasteur nr. 8, sector 5, 050535, Bucuresti, Romania
0214103182
Applications
- Tests individual lead acid cells or monoblocs (up to 16 Volts) in any common configuration, approximately 10-6000 Ah
Test Data Storage
- 500 string locations of 480 test results per string stored internally
User Programmable Functions
- Preset values for over 250 battery types
- Low voltage alarm setting
- Low conductance warning
- Low conductance alarm
- Test mode (pushbutton/auto start)
Calibration
- Franklin Electric Grid Solutions will work with each customer to establish a regular calibration program if it is required by their quality or other management systems
Connectorized Test Cable Options
- Dual contact clamps
- Dual contact probes
- Custom cables by quotation
Power Requirements
- 9.6V, 1600mAH, NiMH
- Internal swappable battery & charger
LCD - FSTN Display
- 2.619 in x 1.309 in
- 128 x 64 pixels
- 40 degree viewing angle
- Contrast ratio 8
- Green LED backlight
Keypad
- Stainless-steel dome
- Polycarbonate overlay
- 1,000,000 actuations
Data Transfer
- Infra-red HP protocol
- Infra-red
- Half-duplex IRDA protocol
- RS-232 printer
- Secure digital card
Environmental Operating Range
- 0 to +104°F (0 to +40°C)
- 95% relative humidity
- Non-condensing
Over Voltage Protection
- Auto-reset disconnect
- Reverse polarity protected
Housing Material
- Acid-resistant ABS plastic
- Santoprene™ overmold
| Voltage Range | 1.5 - 20.0 Volts DC |
| Conductance Range | 100 - 19,990 Siemens |
| Accuracy | + 2% across test range |
| Voltmeter Resolution | 5mV |
| Storage Temperature | -4 to 180°F (-20 to 82°C) |
| Analyzer Dimensions | 11in x 4in x 3in (279mm x 105mm x 80mm) |
| Analyzer Weight | 2.6 lb (1 Kg) |
| Case Dimensions | 19in x 15.5in x 7in (485mm x 395mm x 180mm) |
| Shipping Weight | 11 lb (5 Kg) |