Horn Antennas SAS-588-10 - Frequency - 26.5 GHz to 40 GHz - Gain - 10.0

SAS-588S1
Category: 2.2 - Antennas for compliance testing
Manufacturer: A.H. Systems
Hits: 701

Description

This Standard Gain Horn Antenna will provide reliable, repeatable measurements. An ideal solution and a standard workhorse of any EMC test house for compliance testing.

Features

  • 26.5 GHz to 40 GHz
  • Individually Calibrated at 1 Meter Horizontal Polarity
  • FCC, MIL-STD, VDE and TEMPEST Testing
  • Rugged Construction
  • Three Year Warranty
 

Product Details

The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- .5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with 1/4-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.

Included parts:
  • SAS-588 Antenna with attached waveguide to coax adapter and tripod mount
  • Antenna Calibration Manual
  • Recommended Accessories:
  • PAM-1826 (Preamplifier)
  •  SAC-40G-1.5 (1.5 Meter Low Loss Cable)
  • ATU-514 - Plastic Tripod
  • AEH-510 - Az and El Head

ACCESSORIES

SAC-40G-1.5 - 1.5 Meter N/N Low-Loss Cable, ATU-514 - Plastic Tripod, AEZ-510 - Az and El Head

 

 SPECIFICATIONS

Antenna Kit Specifications

SAS-588 Standard Gain Horn Antenna
Frequency Range: 26.5 GHz - 40 GHz
Antenna Factor: 46.0 dB/m
Gain: 10.0 dBi
Maximum Continuous Power: 10 Watts
Max Radiated Field: 100 V/m
Impedance: 50 ohm
VSWR: 1.3:1 (1.5:1 max)
Connector: WR-28 to 2.9mm female adapter
Mounting Base: 1/4 - 20 Thread, female
Physical Dimensions:
Length: 2.9 in.   (7.37 cm)
Width: 0.6 in.   (1.52 cm)
Height: 0.9 in.   (2.29 cm)
Weight: 0.1 lbs (0.05 kg)