Description
High gain and low VSWR horn antenna excellent for both immunity and emissions compliance testing.
Features
- 18 GHz to 26.5 GHz
- Individually Calibrated at 1 Meter Horizontal Polarity
- FCC, MIL-STD, VDE and TEMPEST Testing
- Linearly Polarized
- Three Year Warranty
Product Details
The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- .5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with 1/4-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.
- SAS-587 Antenna with attached waveguide to coax adapter and tripod mount
- Antenna Calibration Manual
- Recommended Accessories:
- PAM-1826 (Preamplifier)
- SAC-26G-0.5 (0.5 Meter Low Loss Cable)
- ATU-514 - Plastic Tripod
- AEH-510 - Az and El Head
ACCESSORIES
SAC-26G-0.5 - 0.5 Meter N/N Low-Loss Cable, ATU-514 - Plastic Tripod, AEZ-510 - Az and El Head
SPECIFICATIONS
Antenna Kit Specifications
| Frequency Range: | 18 GHz - 26.5 GHz |
| Gain | 20.2 dBi |
| Gain Flatness | +/- 2 dB |
| Maximum Continuous Power: | 50 Watts |
| Max Radiated Field: | 200 V/m |
| Beamwidth | 15° |
| Impedance: | 50 ohm |
| Connector: | WR-42 to SMA female |
| Mounting Base: | ¼ - 20 Thread, female |
| Physical Dimensions: | |
| Length: | 5.1 in. (13 cm) |
| Width: | 1.7 in. (4.3 cm) |
| Height: | 2.2 in. (5.6 cm) |
| Weight: | 0.2 lbs. (0.09 kg) |