Description
This Standard Gain Horn Antenna will provide reliable, repeatable measurements. An ideal solution and a standard workhorse of any EMC test house for compliance testing.
Features
- 5.85 GHz to 8.20 GHz
- Individually Calibrated at 1 Meter Horizontal Polarity
- FCC, MIL-STD, VDE and TEMPEST Testing
- Rugged Construction
- Three Year Warranty
Product Details
The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- 0.5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with 1/4-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.
- SAS-584 Antenna with attached waveguide to coax adapter and tripod mount
- Antenna Calibration Manual
ACCESSORIES
SAC-18G-0.5 - 0.5 Meter N/N Low-Loss Cable, ATU-514 - Plastic Tripod, AEZ-510 - Az and El Head
SPECIFICATIONS
Antenna Kit Specifications
| Frequency Range: | 5.85 GHz - 8.20 GHz |
| Antenna Factor: | 32.2 dB/m |
| Gain: | 14.8 dBi |
| Maximum Continuous Power: | 250 Watts |
| Max Radiated Field: | 500 V/m |
| Beamwidth E-plane: | 30° |
| Beamwidth H-plane: | 29° |
| Impedance: | 50 ohm |
| VSWR: | 1.2:1 (1.5:1 max) |
| Connector: | WR-137 to N-Type female adapter |
| Mounting Base: | ¼ - 20 Thread, female |
| Physical Dimensions: | |
| Length: | 8.6 in. (21.8 cm) |
| Width: | 2.6 in. (6.6 cm) |
| Height: | 3.5 in. (8.89 cm) |
| Weight: | 1.1 lbs. (0.5 kg) |